The Endress+Hauser Group

Media center

Events

Your career with Endress+Hauser

Product tools

E-direct Shop

E-direct complements our traditional offering by providing you with a quick, effective way to purchase easy-to-configure, entry-level instrumentation.

E-direct Shop

Conductive
Point level detection
Liquipoint FTW33

Very compact flush-mounted probe for liquid and pasty media

  • Liquipoint FTW33 ©Endress+Hauser
  • Liquipoint FTW33 demonstration in different media

  • Liquipoint FTW33 ©Endress+Hauser
  • Liquipoint FTW33 ©Endress+Hauser
  • Liquipoint FTW33 ©Endress+Hauser
  • Liquipoint FTW33 ©Endress+Hauser
  • Liquipoint FTW33 ©Endress+Hauser
  • Liquipoint FTW33 ©Endress+Hauser
  • Liquipoint FTW33 ©Endress+Hauser

The Liquipoint FTW33 is developed for the food industry and meets all international hygiene requirements. The device also fits perfectly for industrial applications in all industries. For use in pasty and sticky media and media with heavy build-up.
Advanced:
- Oil and water based fluids and pasty/sticky media
- Real flush-mounted
Reliable:
- Active build-up compensation
- Function check with test magnet
Easy:
- No calibration or adjustment required
- Plug & play without any specific tools

Avantaje

  • Perfect fit to the hygienic industry thanks to flush-mounted design, which allows pigging of pipes

  • Safe and reliable measurement due to build-up compensation, ensuring reliable switching

  • Individual adjustment to each medium not necessary

  • Easy installation thanks to compact design, even in tight conditions or where access is restricted

  • Broad range of process connections for installation in new and existing plants

  • CIP and SIP cleanability ensured - up to protection class IP 69

  • LED display for on-site function check

Domeniu de aplicare

For use in pipes and in storage, mixing and process vessels with or without an agitator. For liquids with electrical conductivity >1 μS/cm or dielectric constant >2. Developed for the food industry. Detection of foam occurring within the food industry possible.

  • Process connections: Threads and hygiene connections

  • Sensor length: Flush-mounted

  • Temperature: -20 to +100°C (-4 to +212°F), CIP/SIP to 150°C (302°F) for 1 hour

  • Pressure: 0 to 25bar abs (0 to 362,5psi abs)

  • Hygienic certificates

Caracteristici şi specificaţii

Documente / Manuale / Software

Accesorii / Piese de schimb

Contact

Endress+Hauser Romania SRL
Splaiul Independentei 319 C 060044 Bucharest România
Tel.: +40 (21) 315 90 67
Fax: +40 (21) 315 90 63
Trimitere e-mail

Noutăţi aferente

Acest site utilizează module cookie. Prin navigarea în continuare pe site, sunteţi de acord cu utilizarea modulelor cookie. Aflaţi mai multe aici închidere