©Endress+Hauser
Specificaţii pe scurt
Process temperature
-200 °C ... 200 °C (-328 °F ... 392 °F)
Process pressure / max. overpressure limit
1bar abs...24.5 bar abs 15 psi...355.25 psi
Domeniu de aplicare
Float Gauge LT5 has been developed for all areas of industry. Many years of operation in a wide variety of applications have proven its reliability.
Level indication of petroleum products such as crude oil, kerosene, light and heavy oil, vegetable oil, palm oil, seed oil and animal oil, highly viscous liquid such as asphalt, certain chemicals (corrosive/toxic vapor can be sealed using a liquid seal pot).
Process temperature for low pressure version: -200 to +200°C (-328 to +392°F)
Process temperature for middle/high pressure version: -45 to +80°C (-49 to +176°F)
Measuring range: Maximum 30m (100ft)
Accuracy: ±2mm (± 0.08")
Avantaje
No electrical power is required to perform the measurement
Built-in repeatability check
Direct reading at the tank side allows you to check the level indication easily
Can be installed on a variety of tanks including fixed roof, floating roof, covered floating roof and spherical tanks
Can be used in conjunction with analog/digital transmitter to perform tank inventory management
LT5 has completely integrated internal mechanisms
Standardized guide wire and anchor design allow easy customer installation
Colecție Xpert
Produse de specialitate
Conceput pentru aplicatii solicitante
Excelenţă tehnică
Simplitate
©Endress+Hauser
Produse simple
Ușor de ales, instalat și administrat
Excelenţă tehnică
Simplitate
Produse clasice
Fiabile, robuste și ușor de întreținut
Excelenţă tehnică
Simplitate
Produse superioare
Extrem de funcțional și convenabil
Excelenţă tehnică
Simplitate
Produse de specialitate
Conceput pentru aplicatii solicitante
Excelenţă tehnică
Simplitate
Colecții FLEX
Excelenţă tehnică
Simplitate
Colecție Fundamental
Îndepliniți-vă nevoile esențiale de măsurare
Excelenţă tehnică
Simplitate
Selecţie Lean
Gestionați-vă cu ușurință procesele de bază
Excelenţă tehnică
Simplitate
Colecție Extended
Optimizați-vă procesele cu tehnologii inovatoare
Excelenţă tehnică
Simplitate
Colecție Xpert
Stăpâniţi cele mai dificile aplicaţii
Excelenţă tehnică
Simplitate
Loading alternative products
Poveşti de succes
Time saved, safety increased
Employees of Returkraft regularly have to fulfill and document all requirements of the SIL measuring points in the plant.
Citiţi întreaga poveste
Fit for purpose instrumentation for CNG compressors
The Egyptian government is working to replace liquid fuels with natural gas. To achieve this they targeted increasing the number of CNG stations in their country from 306 to 1000 by the end of 2021.
Citiţi întreaga poveste
Measuring principle
Servo / Float Tank Gauging
Characteristic / Application
Mechanical Tank Gauge for accurate and reliable Level Measurement
Ambient temperature
-20 °C ... +70 °C (-4 °F ... +158 °F)
Process temperature
-200 °C ... 200 °C (-328 °F ... 392 °F)
Process pressure / max. overpressure limit
1bar abs...24.5 bar abs 15 psi...355.25 psi
Process connection
Thread: 1", 1 1/2" Flange: 40A,
Max. measurement distance
Application limits
Measuring liquid density: 0.5 - 2.0 g/cm3
3 de documente
Mechanical tank gauge for measuring liquid level
EN
RO
Germană Spaniolă French Italiană Japoneză Portugheză Rusă Chineză
31/03/2022
30/01/2020
04/10/2018
17/04/2018
01/08/2014
Limbă:
Engleză
Versiune:
31/03/2022
Dimensiune fişier:
1011.9 KB
Nume fişier:
TI01167GEN_0622-00.pdf
Mechanical tank gauge for measuring liquid level
EN
RO
Cehă Germană Spaniolă French Italiană Japoneză Portugheză Rusă Chineză
31/03/2022
20/12/2019
04/10/2018
17/04/2018
01/08/2014
Limbă:
Engleză
Versiune:
31/03/2022
Dimensiune fişier:
1.7 MB
Nume fişier:
BA01264GEN_0622-00.pdf
Mechanical tank gauge for measuring liquid level
EN
RO
Japoneză
06/10/2023
Limbă:
Engleză
Versiune:
06/10/2023
Dimensiune fişier:
991.8 KB
Nume fişier:
KA01676GEN_0123-00.pdf
Căutare piese de schimb în funcţie de numărul din desen
60 spare parts & accessories
60 spare parts & accessories
60 spare parts & accessories
Seal O shape, front cover steel/glass
Număr desen
Cod de comandă
21
56004464
Număr desen
Cod de comandă
20
71269676
Blind cover set, for rear cover
Număr desen
Cod de comandă
20
56004288
Număr desen
Cod de comandă
42
017860-0220
Număr desen
Cod de comandă
42
017860-0221
Număr desen
Cod de comandă
42
017860-0222
Număr desen
Cod de comandă
42
017860-0223
Număr desen
Cod de comandă
42
017860-0224
M & MM pointer assy., Level, Plastic
Număr desen
Cod de comandă
42
017860-0101
Tape guide, aluminium type
Număr desen
Cod de comandă
80
56004502
Tape guide, aluminium type
Număr desen
Cod de comandă
80
56004502
Număr desen
Cod de comandă
81
52015582
Număr desen
Cod de comandă
81
017860-5033
Conster spring, 20m (range 16m, 20m)
Număr desen
Cod de comandă
81
017860-5035
Număr desen
Cod de comandă
81
017860-5036
Număr desen
Cod de comandă
82
52016945
Conster drum small, metal, 20m
Număr desen
Cod de comandă
84
017860-0107
Conster drum small, metal, 30m
Număr desen
Cod de comandă
84
017860-0108
Conster drum large, aluminum
Număr desen
Cod de comandă
84
017860-0401
Conster drum large, aluminum
Număr desen
Cod de comandă
84
017860-0401
Număr desen
Cod de comandă
85
017860-0001
Indication gear assembly, 2.5m
Număr desen
Cod de comandă
85
017860-5401
Indication gear assembly, 5m
Număr desen
Cod de comandă
85
017860-5402
Indication gear assembly, 10m
Număr desen
Cod de comandă
85
017860-5403
Indication gear assembly, 16m
Număr desen
Cod de comandă
85
017860-5404
Indication gear assembly, 20m
Număr desen
Cod de comandă
85
017860-5405
Număr desen
Cod de comandă
42
017860-5407
Număr desen
Cod de comandă
80
017860-0213
Număr desen
Cod de comandă
80
017860-0213
Seal, rear cover V6502, LP
Număr desen
Cod de comandă
11
70106017
Seal, front cover plastic LT5LP,11/12
Număr desen
Cod de comandă
21
017860-0119
Drain plug 1/4", SUS304,LP
Număr desen
Cod de comandă
80
017860-0056
Front cover, steel/glass, LT5 LP
Număr desen
Cod de comandă
20
71269616
Număr desen
Cod de comandă
20
017860-5450
Gauge head nipple, SUS316, LT5 LP/LT11
Număr desen
Cod de comandă
80
70106005
Crank handle device LT5, LP
Număr desen
Cod de comandă
96
71269687
Tape guide, SUS spring type, standard
Număr desen
Cod de comandă
80
56004503
Număr desen
Cod de comandă
83
017860-0113
Număr desen
Cod de comandă
83
017860-0111
Conster drum large, plastic,LT5LP, 11/12
Număr desen
Cod de comandă
84
017860-0106
Număr desen
Cod de comandă
84
017860-0109
Număr desen
Cod de comandă
84
017860-5123
Tape drum, crank unit, LP
Număr desen
Cod de comandă
84
017860-5124
Union joint, Rc1-1/2 SUS316
Număr desen
Cod de comandă
80
017860-5440
Număr desen
Cod de comandă
83
017860-0318
Număr desen
Cod de comandă
83
017860-0319
Număr desen
Cod de comandă
83
017860-0320
Seal metal for check handle
Număr desen
Cod de comandă
83
017860-0326
Număr desen
Cod de comandă
83
017871-1227
Front cover, steel/glass, LT5 MP/HP
Număr desen
Cod de comandă
20
71269625
Internal parts for Check handle, MP/HP
Număr desen
Cod de comandă
83
71134086
Coupling, male,for gauge head, MP/HP
Număr desen
Cod de comandă
80
017871-1232
Număr desen
Cod de comandă
82
017860-0316
Sprocket + magnet, metric, HP, NBR (LPG)
Număr desen
Cod de comandă
84
70106490
Sprocket + magnet, metric, HP, CR (NH3)
Număr desen
Cod de comandă
84
70106491
Sprocket + magnet, metric, MP, NBR (LPG)
Număr desen
Cod de comandă
84
70106492
Sprocket + magnet, metric, MP, CR (NH3)
Număr desen
Cod de comandă
84
70106493
Tape drum, with hoist-up, MP/HP
Număr desen
Cod de comandă
84
70106495
Tape drum, w/o hoist up, MP/HP
Număr desen
Cod de comandă
84
70106622
Număr desen
Cod de comandă
95
017860-0004
Crank-up handle device LT5, MP
Număr desen
Cod de comandă
96
71269672
Număr desen
Cod de comandă
83
56004299
Număr desen
Cod de comandă
84
56004407
Crank-up handle device LT5, HP
Număr desen
Cod de comandă
96
71269722
Check shaft assembly set, long, HP
Număr desen
Cod de comandă
83
017860-0322
Număr desen
Cod de comandă
84
017860-0311
Measuring tape, CRT 5m (total L 13m)
Număr desen
Cod de comandă
86
56004412
Measuring tape FRT 5m (L 7m) + wire 9m
Număr desen
Cod de comandă
86
017860-0005
Meas. tape FRT 5m(L7m)+PFA coat wire 11m
Număr desen
Cod de comandă
86
017860-0006
Meas. tape FRT 10m(total L 12m)+wire 14m
Număr desen
Cod de comandă
86
017860-0007
Meas. tape FRT 10m(L12m)+PFAcoatwire 16m
Număr desen
Cod de comandă
86
017860-0008
Meas. tape FRT 20m (L 22m)+ wire 24m
Număr desen
Cod de comandă
86
017860-0011
Meas. tape FRT 20m(L22m)+PFAcoatwire 26m
Număr desen
Cod de comandă
86
017860-0012
Meas. tape FRT 30m(total L 32m)+wire 34m
Număr desen
Cod de comandă
86
017860-0013
Meas. tape FRT 30m,1.6mm 316 PTFE coated
Număr desen
Cod de comandă
86
017860-0014
Measuring tape, BT 30m (total L 75m)
Număr desen
Cod de comandă
86
017860-5210
Measuring tape, CRT 10m/BT 5m (L 24m)
Număr desen
Cod de comandă
86
017860-5302
Measuring tape, CRT 20m/BT 16m (L 45m)
Număr desen
Cod de comandă
86
017860-5304
Measuring tape, CRT 30m/BT 20m (L 65m)
Număr desen
Cod de comandă
86
017860-5305
Measuring tape, FRT 5m (L 7m), tape only
Număr desen
Cod de comandă
86
017860-5306
Measuring tape, FRT 10m(L12m), tape only
Număr desen
Cod de comandă
86
017860-5307
Measuring tape, FRT 20m(L 22m),tape only
Număr desen
Cod de comandă
86
017860-5309
Număr desen
Cod de comandă
86
017860-0210
Număr desen
Cod de comandă
86
017860-0211
Float LF400, SUS316, 5kg, LP
Număr desen
Cod de comandă
88
017860-7003
Float LF400, SUS316, 8kg, LP
Număr desen
Cod de comandă
88
017860-7010
Float HF400, SUS316, 8.3kg, MP/HP
Număr desen
Cod de comandă
88
017860-7001
Seal, elbow, low pressure, V6502
Număr desen
Cod de comandă
101
70106015
O-ring, bearing, P8, silicon rubber, LP
Număr desen
Cod de comandă
101
017860-0709
SUS316 bearing, with o-ring 2 piece, LP
Număr desen
Cod de comandă
102
017860-1259
90' Sh.elbow ASME 1-1/2"Cl.150 RF Al.,LP
Număr desen
Cod de comandă
104
017860-0018
90' Sh.elbow Rp 1-1/2" SCS14, LP
Număr desen
Cod de comandă
104
017860-0482
90' Sheave elbow Rp 1-1/2 aluminum, LP
Număr desen
Cod de comandă
104
017860-5445
Seal, elbow SCS14 low pressure V6502
Număr desen
Cod de comandă
101
70106014
SUS316L elbow roller, LP/MP
Număr desen
Cod de comandă
103
017860-0704
O-ring, bearing, PTFE, P10, HP
Număr desen
Cod de comandă
101
017860-0707
SUS316 bearing with 2 o-rings, HP
Număr desen
Cod de comandă
102
017860-0706
Număr desen
Cod de comandă
103
017860-0705
90’ Sh.elb ASME 1-1/2" Cl.300 RF iron HP
Număr desen
Cod de comandă
104
017860-0020
135'Sh.elb ASME 1-1/2"Cl.300 RF iron HP
Număr desen
Cod de comandă
104
017860-0022
Washer, T-anchor, 10K/20K/150lbs, SUS316
Număr desen
Cod de comandă
91
70106494
Washer, T-anchor, Cl.300, SUS316
Număr desen
Cod de comandă
91
017860-5333
Seal, top anchor, JIS 10K, V6502
Număr desen
Cod de comandă
91
70106003
Shaft, top-anchor, SUS316
Număr desen
Cod de comandă
93
017860-0808
Top-anchor, SUS316, socket weld-fix, LP
Număr desen
Cod de comandă
94
017860-0058
Seal T-anchor (Alu housing),thread,V6502
Număr desen
Cod de comandă
91
71269669
Seal, top anchor, thread, V6502
Număr desen
Cod de comandă
91
70106010
Housing Cap, Aluminum, 1" threaded
Număr desen
Cod de comandă
92
017860-0030
T-anchor ASME 1-1/2" Cl.150 RF alumi, LP
Număr desen
Cod de comandă
94
017860-0025
T-anchor ASME 1-1/2" Cl.150 RF SUS316,LP
Număr desen
Cod de comandă
94
017860-0026
T-anchor ASME 1-1/2" Cl.300 RF iron HP
Număr desen
Cod de comandă
94
017860-0027
Top anchor SUS316 threaded, PT1"
Număr desen
Cod de comandă
94
017860-0820
Top-anchor R1 aluminum (ADC6), LP
Număr desen
Cod de comandă
94
017860-5471
Număr desen
Cod de comandă
111
017860-0663
Număr desen
Cod de comandă
112
017860-5117
Valve SCS13 ASME 1-1/2" Cl.150 RF
Număr desen
Cod de comandă
113
017860-0033
Valve SCS13 ASME 1-1/2" Cl.300 RF
Număr desen
Cod de comandă
113
017860-0034
Measuring tape, FRT 30m(L 32m),tape only
Număr desen
Cod de comandă
86
017860-5310
Număr desen
Cod de comandă
86
017860-5501
Număr desen
Cod de comandă
86
017860-5502
Număr desen
Cod de comandă
86
017860-5503
Număr desen
Cod de comandă
86
017860-5504
Număr desen
Cod de comandă
86
017860-5505
Measuring wire, PFA coated, 5m
Număr desen
Cod de comandă
86
017860-5506
Measuring wire, PFA coated, 10m
Număr desen
Cod de comandă
86
017860-5507
Measuring wire, PFA coated, 16m
Număr desen
Cod de comandă
86
017860-5508
Measuring wire, PFA coated, 20m
Număr desen
Cod de comandă
86
017860-5509
Measuring wire, PFA coated, 30m
Număr desen
Cod de comandă
86
017860-5510
Număr desen
Cod de comandă
86
017860-5430
Număr desen
Cod de comandă
86
017860-5432
Bearing x2, > seal pot, elbow roller
Număr desen
Cod de comandă
105
71134091
Sealpot, elbow roller, PVC
Număr desen
Cod de comandă
106
71134090
Număr desen
Cod de comandă
107
017860-0720
Seal liquid, parafin, 2 liter
Număr desen
Cod de comandă
107
017860-5452
Seal pot PVC/PVC, JIS 10K 40A FF
Număr desen
Cod de comandă
108
52017100
Seal pot SGP/AC4A, Rp 1-1/2"
Număr desen
Cod de comandă
108
52017103
Seal pot SGP/AC4A, JIS 10K 40A RF
Număr desen
Cod de comandă
108
52017104
Seal pot 316/316, Rp 1-1/2"
Număr desen
Cod de comandă
108
52017110
Seal pot 316/316, JIS 10K 40A RF
Număr desen
Cod de comandă
108
52017111
Cover elbow Alu, packing, plug
Număr desen
Cod de comandă
101
56004354
Guide wire, strand, SUS316, 12m x 2
Număr desen
Cod de comandă
87
71134089
Guide wire, strand, PFA coated, 24m
Număr desen
Cod de comandă
87
017860-0047
Guide wire, strand, PFA coated, 36m
Număr desen
Cod de comandă
87
017860-0048
Guide wire, strand, PFA coated, 44m
Număr desen
Cod de comandă
87
017860-0049
Guide wire, strand, PFA coated, 64m
Număr desen
Cod de comandă
87
017860-0050
Guide wire, strand, PFA coated, 14m
Număr desen
Cod de comandă
87
017860-5464
Guide wire, strand, SUS316, 14m
Număr desen
Cod de comandă
87
017860-5516
Guide wire, strand, SUS316, 24m
Număr desen
Cod de comandă
87
017860-5517
Guide wire, strand, SUS316, 36m
Număr desen
Cod de comandă
87
017860-5518
Guide wire, strand, SUS316, 44m
Număr desen
Cod de comandă
87
017860-5519
Guide wire, strand, SUS316, 64m
Număr desen
Cod de comandă
87
017860-5520
Guide wire, solid, SUS316, 7m x 2
Număr desen
Cod de comandă
87
017860-5521
Guide wire, solid, SUS316, 12m x 2
Număr desen
Cod de comandă
87
017860-5522
Guide wire, solid, SUS316, 18m x 2
Număr desen
Cod de comandă
87
017860-5523
Guide wire, solid, SUS316, 22m x 2
Număr desen
Cod de comandă
87
017860-5524
Guide wire, solid, SUS316, 32m x 2
Număr desen
Cod de comandă
87
017860-5525
Anchor hook SS400, bolt, nut PVC
Număr desen
Cod de comandă
87
52016949
Anchor hook SUS316, bolt, nut PVC
Număr desen
Cod de comandă
87
52016951
Anchor hook SS400, bolt, nut SUS316L
Număr desen
Cod de comandă
87
017860-5441
Anchor hook SUS316, bolt, nut SUS316L
Număr desen
Cod de comandă
87
017860-5442
Wire guide socket, FRT instal. Rc 1-1/2
Număr desen
Cod de comandă
80
017860-0721
Număr desen
Cod de comandă
80
017860-5420
Respectăm confidenţialitatea dumneavoastră
Utilizăm module cookie pentru a optimiza experienţa dumneavoastră de navigare şi pentru a colecta date statistice în vederea optimizării funcţionalităţii site-ului web şi pentru a vă oferi reclame sau conţinuturi personalizate.
Prin selectarea opţiunii „Acceptare totală”, vă oferiţi consimţământul privind utilizarea modulelor cookie.
Pentru detalii suplimentare, vă rugăm să citiţi Politica noastră privind modulele cookie .
Personalizați
Acceptar doar esențialul
Acceptare totală