Specificaţii pe scurt
-
Process temperature
max. 50°C
(max. 122°F) -
Process pressure
max. 6bar
(max.87psi)
Domeniu de aplicare
Flowfit COA250 is a flow assembly for wall mounting or unsupported installation in pipes and is the ideal solution wherever sensor immersion is either impossible or undesirable. Its design speeds up sensor response and allows easy accessibility to the sensor for calibration in the air. Insensitive to clogging, it provides automatic self-venting ensuring reliable measured values at all times. Better still, with the automatic cleaning nozzle, you'll benefit from extended maintenance intervals.
Flowfit COA250 is a flow assembly for oxygen sensors with a diameter of 40mm in:
Wastewater treatment plants:
- Process water treatment and monitoring
- Effluent water monitoringDrinking and process water:
- Process water treatment and monitoring
- Water quality monitoring in rivers, lakes or seasUtilities of all industries:
- Process water treatment and monitoring
- Cooling water monitoring
Avantaje
Flexible mounting options: Suitable for wall mounting or unsupported pipe installation.
Fast measuring values: Low assembly volume shortens sensor response times.
Easy and safe maintenance: Automatic sensor cleaning without process interrupt.
Optimized sensor accessibility: Easy sensor removal for calibration in the air.
Fast availability: Automatic de-aeration thanks to bottom inlet/top outlet design.
Robust design: Suitable for process pressures up to 6 bar (87 psi).
-
Produse de specialitate
- Conceput pentru aplicatii solicitante
Excelenţă tehnică
Simplitate
Variabil
Colecții FLEX | Excelenţă tehnică | Simplitate |
---|---|---|
Colecție Fundamental Îndepliniți-vă nevoile esențiale de măsurare |
Excelenţă tehnică
|
Simplitate
|
Selecţie Lean Gestionați-vă cu ușurință procesele de bază |
Excelenţă tehnică
|
Simplitate
|
Colecție Extended Optimizați-vă procesele cu tehnologii inovatoare |
Excelenţă tehnică
|
Simplitate
|
Colecție Xpert Stăpâniţi cele mai dificile aplicaţii |
Excelenţă tehnică
|
Simplitate
Variabil |
-
-
Informaţii tehnice (TI)
Flow Assembly for O2 Measurement FlowFit W COA 250
Assembly for unsupported installation in pipes or wall mounting
EN RO 01/03/200701/10/200101/09/1997Limbă:
Engleză
Versiune:
01/03/2007
Dimensiune fişier:
443.4 KB
Nume fişier:
TI111CEN.PDF
-
-
-
Instrucţiuni de operare (BA)
Operating instructions COA250
Flow assembly for oxygen sensors
EN RO 28/02/200731/12/2003Limbă:
Engleză
Versiune:
28/02/2007
Dimensiune fişier:
532.9 KB
Nume fişier:
BA111CEN.pdf
-
-
-
Declaraţia producătorului
Product family: FlowFit W
Product root: COA250-
Declaration number: HE_01033_01.18
Manufacturer specification: RoHSEN RO 04/09/2018Limbă:
Engleză
Versiune:
04/09/2018
Dimensiune fişier:
88.8 KB
Nume fişier:
HE_01033_01.18.pdf
-