CPA474 retractable assembly is designed for harsh chemical applications.

Manual or automatic retractable assembly Cleanfit CPA474

Name: Cleanfit P CPA474
Brand: Endress+Hauser
Availability: InStock

Assembly with ball valve for chemical and industrial wastewater applications

CPA474

Comparare

Specificaţii pe scurt

Process temperature

PA version: max. 80 °C (max. 176 °F)
Stainless steel pressure cylinder: max. 120 °C (248 °F)
Process pressure

PA pressure cylinder: max. 6 bar (87 psi)
Stainless steel pressure cylinder: max. 10 bar (145 psi) at 40 °C (104 °F)

Vizualizare totală a specificaţiilor

Domeniu de aplicare

The Cleanfit CPA474 retractable assembly is designed for applications which require safe separation from the process and contain media that could affect stainless steel. It offers highest operating comfort: You can replace sensors and even service the assembly while the process is running. The optional electric or pneumatic control system enables automated cleaning and calibration even in difficult processes.

Cleanfit CPA474 is intended for use in tanks and pipes in:

Chemical industry
Wastewater / industrial water
Power plants
Refuse incinerators

It is suitable to be used with pressures of up to 10 bar (stainless steel cylinder) or 6 bar (PA cylinder).

Avantaje

Safe and reliable separation from the process by ball valve, even under harsh conditions
Suitable for corrosive media: Only polymers (PP, PVDF, PEEK) in contact with medium
No process interruption for electrode cleaning and calibration – saves maintenance time and costs
Extended operating life of electrodes due to automatic cleaning
Flexible adaptation to all applications by great variety of materials and process connections

Predecesor

CPA463

Poveşti de succes

Automated pH measuring point in wastewater

The Dow plant in Stade relies on Endress+Hauser solutions for pH monitoring in the treatment of production wastewater.
Citiţi întreaga poveste
Water/steam circuit at GETEC PARK.SWISS

GETEC SWISS.PARK improves plant efficiency and decreases downtimes thanks to Endress+Hauser SWAS System
Citiţi întreaga poveste
Measurable and testable: Monitoring with Teqwave

Efficient component cleaning is an important part of the production of industrially manufactured components. Borer Chemie AG therefore relies on the concentration measurement with Teqwave F, I and T.
Citiţi întreaga poveste
Liquid analysis in LNG trains

The various process steps in a gas liquefaction plant must comply with different limit values. Our products are ideally suited for these processes.
Citiţi întreaga poveste
Improved thickener operation at Minera Valle Central

The measurement of interface in thickeners is done manually, while the turbidity measurement is done by obtaining samples sent to the laboratory. With Endress+Hauser there is an automated solution.
Citiţi întreaga poveste

Produse simple
Ușor de ales, instalat și administrat

Excelenţă tehnică

Simplitate

Ce este FLEX?

Produse clasice
Fiabile, robuste și ușor de întreținut

Excelenţă tehnică

Simplitate

Ce este FLEX?

Produse superioare
Extrem de funcțional și convenabil

Excelenţă tehnică

Simplitate

Ce este FLEX?

Produse de specialitate
Conceput pentru aplicatii solicitante

Excelenţă tehnică

Simplitate

Variabil

Ce este FLEX?

Colecții FLEX	Excelenţă tehnică	Simplitate
F L E X Colecție Fundamental Îndepliniți-vă nevoile esențiale de măsurare	Excelenţă tehnică	Simplitate
F L E X Selecţie Lean Gestionați-vă cu ușurință procesele de bază	Excelenţă tehnică	Simplitate
F L E X Colecție Extended Optimizați-vă procesele cu tehnologii inovatoare	Excelenţă tehnică	Simplitate
F L E X Colecție Xpert Stăpâniţi cele mai dificile aplicaţii	Excelenţă tehnică	Simplitate Variabil

Aflaţi mai multe despre selecţiile FLEX

V-ar putea interesa şi

Despre noi
Production of assemblies

The safety and operating comfort of an analytical measuring point starts with using the right assembly. Our flexible assembly production ensures that you get the right assembly for your needs.
Mai multe informaţii

Measuring principle

Potentiometric
Application

Chemical industry, wastewater, industrial water, power plants, refuse incinerators
Installation

Retractable assembly with ball valve
Characteristic

Open and closed tank, piping (min. DN80)
Design

Manual or pneumatic
Manual or pneumatic ball valve
Can be fully automated with CPC30 / 300
Integrated rinse chamber with connection G1/4" or NPT1/4"
Material

Seals: EPDM / FPM / perfluoroelastomer
Electrode holder: PP / PEEK / PVDF
Ball valve: PP / PVDF
Inlet safety seal: PVDF, PTFE, Viton®
Outlet safety seal: PVDF
Rinse connection socket: PVDF
Dimension

Immersion depth: 71 to 207 mm
(2.8 to 8.15 inch)
Process temperature

PA version: max. 80 °C (max. 176 °F)
Stainless steel pressure cylinder: max. 120 °C (248 °F)
Process pressure

PA pressure cylinder: max. 6 bar (87 psi)
Stainless steel pressure cylinder: max. 10 bar (145 psi) at 40 °C (104 °F)
Connection

Process connection DN50, ANSI 2"
Additional certifications

Inspection certificate 3.1 acc. to EN 10204 on demand

Measuring principle

Sensor ORP / Redox
Application

Chemical industry, wastewater, industrial water, power plants, refuse incinerators
Installation

Retractable holder with ball valve
Characteristic

Open and closed tank, piping (min. DN80)
Design

Manual or pneumatic
Manual or pneumatic ball valve
Can be fully automated with CPC30 / 300
Integrated rinse chamber with connection G1/4" or NPT1/4"
Material

Seals: EPDM / FPM / perfluoroelastomer
Electrode holder: PP / PEEK / PVDF
Ball valve: PP / PVDF
Inlet safety seal: PVDF, PTFE, Viton®
Outlet safety seal: PVDF
Rinse connection socket: PVDF
Dimension

Immersion depth: 71 to 207 mm (2.8 to 8.15 inch)
Process temperature

PA version: max. 80 °C (max. 176 °F)
Stainless steel pressure cylinder: max. 120 °C (248 °F)
Process pressure

PA pressure cylinder: max. 6 bar (87 psi)
Stainless steel pressure cylinder: max. 10 bar (145 psi) at 40 °C (104 °F)
Connection

Process connection DN50, ANSI 2"

Respectăm confidenţialitatea dumneavoastră

Utilizăm module cookie pentru a optimiza experienţa dumneavoastră de navigare şi pentru a colecta date statistice în vederea optimizării funcţionalităţii site-ului web şi pentru a vă oferi reclame sau conţinuturi personalizate.

Prin selectarea opţiunii „Acceptare totală”, vă oferiţi consimţământul privind utilizarea modulelor cookie.
Pentru detalii suplimentare, vă rugăm să citiţi Politica noastră privind modulele cookie .

	EN	RO
01/04/2010
01/02/2005
01/09/2003
01/10/2002

Limbă:	Engleză
Versiune:	01/04/2010
Dimensiune fişier:	1009.5 KB
Nume fişier:	TI345CEN_0410.pdf

	EN	RO
22/07/2015
01/07/2006

Limbă:	Engleză
Versiune:	22/07/2015
Dimensiune fişier:	2 MB
Nume fişier:	TI00404CEN_1315.pdf

	EN	RO
01/04/2010
01/05/2005
01/02/2005
01/01/2004
01/09/2003

Limbă:	Japoneză
Versiune:	08/02/2024
Dimensiune fişier:	2.6 MB
Nume fişier:	CP00010CJA_1315_1024_pH_selection_guide.pdf

Limbă:	Germană
Versiune:	01/12/2021
Dimensiune fişier:	3.3 MB
Nume fişier:	CP00010CDE_1621_pH Auswahlhilfe_2021.pdf

	EN	RO
20/02/2025

	EN	RO
24/02/2025

	EN	RO
19/02/2025

	EN	RO
01/07/2003

Manual or automatic retractable assembly Cleanfit CPA474

Assembly with ball valve for chemical and industrial wastewater applications

Specificaţii pe scurt

Process temperature

Process pressure

Domeniu de aplicare

Avantaje

Predecesor

Poveşti de succes

Automated pH measuring point in wastewater

Water/steam circuit at GETEC PARK.SWISS

Measurable and testable: Monitoring with Teqwave

Liquid analysis in LNG trains

Improved thickener operation at Minera Valle Central

V-ar putea interesa şi

Production of assemblies

Measuring principle

Application

Installation

Characteristic

Design

Material

Dimension

Process temperature

Process pressure

Connection

Additional certifications

Measuring principle

Application

Installation

Characteristic

Design

Material

Dimension

Process temperature

Process pressure

Connection

Back

Technical Information Retractable Assembly Cleanfit CPA474

Technical Information Topcal S CPC310

Operating Instructions Cleanfit CPA474

EA for Cleanfit CPA474

EA Spare parts kits for Cleanfit CPA474 process retractable assemblies

EA Spare parts kits for Cleanfit CPA472D, CPA473 and CPA474 process retractable assemblies

SD CleanFit Servicekits / Spare part kits

pH measurement in industrial processes

産業プロセスにおけるpH測定

pH-Messung in Industrieprozessen

Back

KIT CPA474 Electrode guide PP short

KIT CPA474 electrode guide PVDF short

KIT CPA474 electrode guide PEEK short

KIT CPA474 electrode guide PP long

Kit CPA474 electrode guide PVDF long

KIT CPA474 electrode guide PEEK long

KIT CPA47x:stop bolt with handle (1 pc.)

KIT CPA473/474 cylinder PA short

KIT CPA473/474 cylinder PA long

KIT CPA471 long+474 short: Cylinder SS

KIT CPA473/474 cylinder 1.4404 long

KIT CPA47x pneu.connection G1/8 AD6 10p

KIT CPA47X: Throttel check valve

Kit CPA474 rinsing chamber PP

Kit CPA474 rinsing chamber PVDF

Kit CPA474 rinsing chamber PEEK

Kit CPA474 PP press proof ,rins. chamber

Kit CPA474 PVDF pr.proof, rins. chamber

Kit CPA474 PEEK pr. proof, rins. chamber

KIT CPA474 PP-EPDM, ball valve

KIT CPA474 ball valve PP-VITON

KIT CPA474 PP-FFKM, ball valve

KIT CPA474 PVDF-EPDM, ball valve

KIT CPA474 PVDF-VITON, ball valve

KIT CPA474 PVDF-FFKM, ball valve

KIT CPA474 Actuation pneumatic complete

KIT CPA474 Actuation pneum. compl. el.

Kit CPA47: intermediate flange ball valv

Kit CPA473/474: Connection block pneumat

Pneum. proxim. switches f.retrofitting

KIT CPA473/474: Electr. proxim.switches

Cleaning and calibration system
Liquiline Control CDC90

Cleaning and calibration system
Liquiline Control CDC90