Digital pH sensor
Memosens CPL51E

Liquiline Mobile CML18 with a pH sensor Memosens CPL51E

Memosens pH electrode for standard applications in laboratories and in the field

With its robust plastic shaft, the glass membrane protection and metal free connection, Memosens CPL51E can be used for grab sample analysis directly in the field or in the laboratory. The sensor comes pre-calibrated and is directly ready for use. Ideally to be used in combination with the mobile handheld Liquiline Mobile CML18 without any additional settings.

Dimensionare
Preţurile după conectare şi configurare

Comparare

Selectare rapidă

Alegeţi dintre opţiunile noastre sugerate

<%label%>
-- selected coding

-- selected label
<%label%>
Căutaţi mai multe opţiuni? Utilizaţi un configurator individual pentru a continua.
<%feature%>
-- selected coding

-- selected label
<%feature%>
<%coding%>

<%label%>

Căutaţi mai multe opţiuni? Utilizaţi un configurator individual pentru a continua.
Process Connection
<%coding%>

<%label%>

<%coding%>

<%label%>

<%message%>

Accesorii opţionale

Utilizaţi un configurator individual pentru a continua.

Configurare individuală

Selectaţi în continuare dintre toate opţiunile posibile

Configure

Avantaje
The inductive Memosens sensor connection is insensitive to moisture and corrosion.

Suitable for use in the laboratory or in the field to check your running process. A physical protection keeps the glass membrane safe in both environments.

Automatic...

Arată mai mult
The inductive Memosens sensor connection is insensitive to moisture and corrosion.

Suitable for use in the laboratory or in the field to check your running process. A physical protection keeps the glass membrane safe in both environments.

Automatic temperature compensation thanks to integrated temperature sensor.

Fast response time even in cold ionweak water.

Reference system with open aperture minimizes the risk of clogging.

Arată mai puţin

Domeniu de aplicare
Memosens CPL51E is suited for the following applications in drinking water, wastewater and process water:

Check of on-line measuring loops

Analysis of grab samples (on-site as well as in the laboratory)

pH measurement at process points where no...

Arată mai mult
Memosens CPL51E is suited for the following applications in drinking water, wastewater and process water:

Check of on-line measuring loops

Analysis of grab samples (on-site as well as in the laboratory)

pH measurement at process points where no online measurement is installed

Arată mai puţin

Caracteristici şi specificaţii

Înapoi

Details

Measuring principle

Glass electrode
Application

Grab sample measurement in laboratory and for portable use in the field
Specially designed for water, wastewater, utility water and process water
Characteristic

Digital Memosens pH sensor for standard use in laboratories and for portable use in the field
Open hole non-clogging junction for fast and reliable measurement
Measurement range

pH 0 to 14 (1 to 12 application range)
Material

Glass and polymer
Dimension

Diameter: 12 mm (0.47 inch)
Shaft length: 120 mm (4.72 inch)
Process temperature

-5 to 80 °C (23 to 176 °F)
Process pressure

1 bar, not intended for continues measurment in process
Temperature sensor

NTC 30kΩ
Connection

Inductive, digital Connection head with Memosens technology
Ingres protection

IP68

Arată mai mult
Arată mai puţin

Documente / Manuale / Software

Tip descărcare

pH sensor CPL51E
Laboratory sensor with Memosens 2.0 technology

Operating Instruction (BA)
Memosens
Product Code: CPL51E-
Declaration Number: EC_00803_01.19

EU Declaration

Germană , Engleză , fr